ADAMS RITE 1354 MINI MORTICE SHEARLOCK 12/24VDC - 1500kg
The Adams Rite Armlock® 1354 is a mini Electro-Shearmagnet to facilitate remote access where minimal intrusion into the environment is required.
The product caters for single action internal doors or external doors where a form of cover is situated above the doorway to prevent direct rain penetration.
|Magnet Dimensions (excluding shear pins):||
Mortice magnet: 30mm x 164mm x 25mm. Surface magnet: 38mm x 200mm x 38mm.
|Adjustable Armature: Mortice:||30mm x 164mm x 35mm.|
|Surface:||38mm x 200mm x 38mm.|
|Magnet Material:||Electroless nickel plated steel in aluminium chassis.|
|Finish:||Surface mounted housing finishes: Standard: Brushed silver, gold or bronze anodised on request.|
|Nominal Holding Force:||1500kg (assuming correct installation/alignment).|
|Supply Voltage:||Dual, 12 or 24vDC.|
|Nominal Current Draw:||Pull in - 1.5A @ 12vDC, 1.5A @ 24vDC. Holding - 0.5A @ 12vDC, 0.4A @ 24vDC.|
|Locking Gaps:||Distance between armature face and magnet face: 12vDC: Horizontal/vertical application - 4mm max. 24vDC: Horizontal/vertical application - 5mm max.|
|Locking Tolerance:||Lateral - ± 2mm. Longitudinal - ± 5mm.|
|Door Gap (sensor range):||Maximum 8mm|
|Locking Time:||Factory set at 1-2 seconds, adjustable up to 30 secs.|
|Monitoring:||Precise anti-tamper monitoring of lock status using "hall effect" switch. Volt free changeover contacts rated @ 24vDC 1A for remote monitoring|
|Door Position Contacts:||Built-in door position switch. Note that an independent door position switch must be fitted in steel door applications (order 1354-0600 separately).|
|Retry Facility:||Failure to lock due to slight misalignment will result in the lock automatically retrying, up to a further 10 times, if required.|
|Ambient Temperature:||Operating -20°C to +40°C. It is essential to use a fully rectified and regulated PSU with the 1354.|
|Note:||To achieve immediate release, it is important that the release switch breaks the circuit on the positive supply to the magnet.|